Collection
Technical references added to the library in the last 90 days.
985–1008 / 1044
Siemens 2013
Use the tier factors as defaults in the early-stage area estimator: grey space = white space x factor.
Siemens 2015
When comparing AC and DC distribution, compute chain efficiency from component curves at realistic part load instead of quoting headline savings.
Türk Standardları Enstitüsü (TSE) Year not stated
Express the reliability target as separate class selectors for power, cooling and cabling instead of one label.
Türk Standardları Enstitüsü (TSE) Year not stated
You may cite the designation 'TS EN 50600-3-1', but do not add an edition year until it is confirmed in the TSE catalogue.
Türk Standardları Enstitüsü (TSE) Year not stated
In new references, look to CLC/TS 50600-5-1:2023 rather than CLC/TR 50600-99-1.
Türk Standardları Enstitüsü (TSE) Year not stated
Do not treat this record as a design requirement, and do not encode a national version number for 99-2 in checklists.
Türk Standardları Enstitüsü (TSE) Year not stated
Do not encode a dated TS or EN edition for 99-3 in the rule engine; the record does not prove edition equivalence.
Türk Standardları Enstitüsü (TSE) Year not stated
Keep 2-10 and 2-6 as separate entries in rule or checklist citations.
Türk Standardları Enstitüsü (TSE) Year not stated
Cite 'CLC/TS 50600-4-31:2024' when referring to it in an availability assessment.
Türk Standardları Enstitüsü (TSE) Year not stated
When updating checklists that cite 99-1 or 99-2, point them to 5-1 as the European successor.
Türk Standardları Enstitüsü (TSE) Year not stated
In early building and construction design, do not treat this record as a source of requirements; just note which part of the standard is relevant.
Türk Standardları Enstitüsü (TSE) Year not stated
Keep the power distribution class selector independent of cabling and cooling, and document path count and redundancy against the class chosen.
Türk Standardları Enstitüsü (TSE) Year not stated
Define the cooling class selector apart from power and cabling, and show the target class per domain in the project documents.
Türk Standardları Enstitüsü (TSE) Year not stated
Keep the cabling class selector separate, and document the reason whenever it is chosen lower than the power class.
Türk Standardları Enstitüsü (TSE) Year not stated
Before writing 'TS EN 50600-2-5' in a deliverable, confirm the number and edition in the TSE catalogue; this record cannot do that.
Türk Standardları Enstitüsü (TSE) Year not stated
If a reference list cites '2-6', check which published part is actually meant and compare it against 3-1.
Türk Standardları Enstitüsü (TSE) Year not stated
Name EN 50600-4-1:2016 as the European text in a specification; do not write a TS equivalent.
Türk Standardları Enstitüsü (TSE) Year not stated
Establish the edition year from another source before citing this part; this record gives none.
Türk Standardları Enstitüsü (TSE) Year not stated
When writing a renewable-energy statement, cite EN 50600-4-3:2016 as a source but check its currentness separately.
Türk Standardları Enstitüsü (TSE) Year not stated
Take the edition year for a citation from another source.
Türk Standardları Enstitüsü (TSE) Year not stated
Confirm the edition year from another source.
Türk Standardları Enstitüsü (TSE) Year not stated
Get the edition from another source before citing.
Türk Standardları Enstitüsü (TSE) Year not stated
Determine the edition year from another source before citing.
U.S. DoD (UFC) 2025
Select supply voltage by demand load (208Y/120 V below 150 kVA, 480Y/277 V above) and attach a life-cycle comparison to the design analysis if 208Y/120 V is proposed for a larger data hall.
All content and rights belong to the respective authors and publishers. SoSo CAD provides only the citation, its own summary and a link to the source, and is not responsible for the sources' content.
Monthly newsletter · free
Once a month: new library sources, changes to Turkish regulations and upcoming data centre events.
