Topic guide
Explore publications on data centre electrical infrastructure, from power distribution and protection to supply architectures and capacity planning. Compare technical summaries, publication details and links to the original references.
Schneider Electric 2024
Store the IEC class code (for example VFI-SS-111) and the topology type on every UPS model, and compare models through those fields.
Türkiye Elektrik Dağıtım A.Ş. (TEDAŞ) 2017
Default indoor data center transformers to cast-resin dry type; no oil pit is needed under the fire regulation.
Türk Standardları Enstitüsü (TSE) Year not stated
Keep the cabling class selector separate, and document the reason whenever it is chosen lower than the power class.
Monthly newsletter · free
Once a month: new library sources, changes to Turkish regulations and upcoming data centre events.
1–24 / 358
Schneider Electric 2024
Store the IEC class code (for example VFI-SS-111) and the topology type on every UPS model, and compare models through those fields.
Türkiye Elektrik Dağıtım A.Ş. (TEDAŞ) 2017
Default indoor data center transformers to cast-resin dry type; no oil pit is needed under the fire regulation.
Türk Standardları Enstitüsü (TSE) Year not stated
Keep the cabling class selector separate, and document the reason whenever it is chosen lower than the power class.
Cushman & Wakefield 2026
Add grid stability (T&D loss %) and power-delivery timeline fields to the site comparison matrix.
JLL 2026
In the cost module, use $/MW shell-and-core benchmarks (with year) as a sanity range for capex estimates, and show tenant fit-out separately.
Lawrence Berkeley National Laboratory 2026
Use as a curated pointer list when updating grid-interaction and tariff knowledge.
FacilitiesNet / Building Operating Management 2020
Include start-signal logic, neutral timing and in-phase monitor settings in generator/ATS catalogue entries.
ABB 2013
Add an 'arcResistant' field to the switchgear catalog with classification (for example IEC 62271-200 IAC / IEC TR 61641 / IEEE C37.20.7).
Türkiye Büyük Millet Meclisi 2013
In a regulatory checklist, classify each on-site source (diesel standby, PV, BESS) against the Article 14 exemptions.
NVIDIA 2025
Add a single-ended 800 VDC distribution option to the electrical model, with rectifier blocks of ~1.5 MVA (LV) and up to 7.5 MVA (MV/SST) and the stated efficiencies.
NVIDIA 2026
Define four electrical templates for AI halls: AC baseline (480 VAC, 100 A whips, 4M3), Power Rack, 2 MW Power Center and 4.8 MW DC Power Block with 4+1 catcher.
arXiv preprint (Texas Tech University / PNNL; submitted to Renewable and Sustainable Energy Reviews) 2026
Base interconnection studies on staged, updatable facility data rather than a single static MW value; requested peak MW and annual energy alone do not establish integration.
IEEE Access (Institute of Electrical and Electronics Engineers (IEEE)) 2021
Set the number of spare PSUs/servers in a rack with a LOWP-style calculation from target service reliability and the load duration curve, avoiding unnecessary overprovisioning.
ACM/SPEC 2014
In the metering design module, offer Level 1/2/3 templates that place meters (for example upstream of PSUs/PDUs) and set the required coverage and sampling.
Schneider Electric 2015
Build the power-chain calculator as UPS(load) x wiring(load) x PSU(load), defaulting wiring to 1% loss at full load scaling with load squared.
IEEE Access (Institute of Electrical and Electronics Engineers (IEEE)) 2021
Define the failure state (loss of PDU power, loss of a rack, loss of service) explicitly before starting a reliability study and state it in the report.
Eaton 2012
Provide a power-chain efficiency calculator by stage (transformer, UPS mode, PDU, PSU) including the effect of the A/B load split.
Schneider Electric 2011
In the power-chain efficiency calculator multiply UPS, transformer/PDU, distribution and PSU efficiencies at the actual load fraction rather than nameplate, and offer architecture presets for the five options with Table 1 values as defaults.
Vertiv 2025
Add an AI load-profile object to IT loads (step amplitude %, repetition Hz, duty cycle, peak % of nominal) and use it in UPS and battery sizing alongside autonomy.
arXiv preprint (University of Alberta) 2025
Include rack-level templates for AI racks (32-34 kW air-cooled, 73-132 kW liquid-cooled NVL) with per-GPU power.
Cummins 2014
Add a windingPitch field to the alternator catalog and require 2/3 pitch (or flag) for LV 4-wire generator systems.
Schneider Electric 2016
Offer reference architectures 'traditional 2N', 'OCP 1N', 'OCP 2N (no central UPS, 1N BBU)' and 'simplified 2N mixed-load (single UPS path)' in the topology builder; let a rack type declare power shelf, BBU runtime and PSU redundancy.
ITEGAM- Journal of Engineering and Technology for Industrial Applications (ITEGAM-JETIA) (GN1 Sistemas e Publicacoes Ltd.) 2021
Choose online double-conversion UPS for loads where power quality improvement is expected; an offline UPS passes harmonics and unbalance through to the load side.
ASHRAE 2022
In the compliance calculator, compute annualised MLC and design ELC per segment (UPS, distribution, PDU) and compare them with climate-zone limits.
All content and rights belong to the respective authors and publishers. SoSo CAD provides only the citation, its own summary and a link to the source, and is not responsible for the sources' content.
