Collection
Power distribution, UPS, batteries, protection and redundant supply.
97–120 / 418
U.S. Department of Energy 2025
Track as a regulatory and site news item linked to the DOE RFI and EO 14318 records.
Lawrence Berkeley National Laboratory 2025
Add a demand-flexibility scenario to the energy model: curtailable IT share and on-site generation or BESS dispatch.
U.S. Department of Energy / Federal Register 2025
For federal-site scenarios, keep water (million gal/day), grid market (MISO, PJM) and area (acres) as separate fields in site records.
U.S. Department of Energy / Federal Register 2025
When planning a large load connection, query the interconnection queue, transmission congestion and reconductoring potential for the relevant grid region early.
Consulting-Specifying Engineer 2015
Include economizer control limits, part-load loss curves for each electrical stage and the redundancy topology as energy model inputs.
Uptime Institute Journal 2014
In Tier III/IV templates, route two independent active paths from UPS output to each rack.
Buildings (MDPI AG) 2025
Plan UPS maintenance from a condition table that maps each unit's state to MTBF and MTTR, then pick the units to maintain that meet target availability at the lowest cost.
arXiv preprint (Stanford University) 2026
Offer rack-level smoothing storage (filter + battery/supercap + DC regulator) as a catalog item for HVDC AI racks, sized by peak power swing and grid ramp limit rather than backup energy.
Eaton 2015
Keep an efficiency curve per mode (double conversion versus eco/ESS) and the transfer time in the catalogue.
Schneider Electric 2014
Compute eco savings through the PUE stack (UPS loss plus the cooling of that loss), not from the UPS efficiency delta alone.
Uptime Institute Journal 2025
Catalogue AI racks with both 'ratedPowerKw' and 'peakTransientKw' (e.g. 132 vs 150+ for NVL72).
Schneider Electric 2015
In the single-line editor define node types for MV switchgear, MV/LV transformer, LV switchboard/ATS, UPS input/output/distribution boards, STS, PDU, RPP, busway, panelboard and rack PDU, each with rated voltage, rated current, breaking capacity (kAIC/Icu) and withstand rating (SCCR/Icw).
Schneider Electric 2011
Model each infrastructure block with no-load, proportional and square-law coefficients (Table 2 as defaults) and compute PUE as a curve over 0-100% IT utilisation.
arXiv preprint (Harvard University et al.) 2025
For AI-campus grid studies, use the default rack-density bands (7-10 kW traditional, 30-100+ kW AI).
Lawrence Berkeley National Laboratory / The Brattle Group 2026
The cost model should support large-load tariff features: minimum billing demand (% of contract MW), contract term, ramp schedule and collateral.
Enerji Piyasası Düzenleme Kurumu (EPDK) 2022
If the site has on-site BESS or generation exporting to the grid, add a DSO SCADA interface item to the electrical scope.
T.C. Enerji ve Tabii Kaynaklar Bakanlığı 1984
In cable sizing (TR profile), add the Turkish voltage-drop limits: 1.5% lighting and socket, 3% motor from building entry, and 5% from transformer to building entry.
T.C. Enerji ve Tabii Kaynaklar Bakanlığı 2000
In the MV module (TR profile), select transformer primary protection automatically: fused load-break switch up to 400 kVA, fused load-break switch or relay-operated breaker up to 1,600 kVA, relay-operated breaker above.
Enerji Piyasası Düzenleme Kurumu (EPDK) 2014
Grid-connection wizard (TR profile): ask for contracted power and voltage level, route requests above 36 kV to TEIAS and lower ones to the regional distribution company.
Enerji Piyasası Düzenleme Kurumu (EPDK) 2021
Treat a grid-interactive data-centre battery as storage integrated with a consumption facility: same metering point and a distribution company connection opinion are required.
Enerji Piyasası Düzenleme Kurumu (EPDK) 2019
In the generator module, tag standby diesel sets as 'imdat grubu': no generation licence, no export.
Enerji Piyasası Düzenleme Kurumu (EPDK) 2014
In power-quality checks, assess harmonic current emission of UPS and IT loads against Annex 8 limits at the point of common coupling, and size active filters if needed.
T.C. Enerji ve Tabii Kaynaklar Bakanlığı 2014
In export and QA, tag every rule and calculation with the standard used so the TR project-approval package can show the TS/EN/IEC/IEEE hierarchy.
T.C. Enerji ve Tabii Kaynaklar Bakanlığı 2001
In the earthing module (TR profile), enforce the 16 mm2 copper minimum for earthing conductors.
All content and rights belong to the respective authors and publishers. SoSo CAD provides only the citation, its own summary and a link to the source, and is not responsible for the sources' content.
Monthly newsletter · free
Once a month: new library sources, changes to Turkish regulations and upcoming data centre events.
