Topic guide
Explore publications on data centre electrical infrastructure, from power distribution and protection to supply architectures and capacity planning. Compare technical summaries, publication details and links to the original references.
217–240 / 358
Schneider Electric 2017
Build the data model on the facility > room > pod > cabinet > device hierarchy and give each subsystem a deployment level and a linkage rule (for example 1 CRAH per N racks).
Schneider Electric 2017
Make the pod a first-class object between room and rack, with feed power, input voltage, feeder breaker, feed redundancy, UPS location and rack count.
Lawrence Berkeley National Laboratory 2026
Add interconnection strategy options (staged or phased energisation, flexible or curtailable service, BYOG) to the campus power plan.
ABB Year not stated
In a selectivity study, present curve overlap and current-ratio checks only as screening tools.
IEEE Open Journal of Power Electronics (Institute of Electrical and Electronics Engineers (IEEE)) 2026
In rack power templates, model PSU count per shelf and the 33 kW shelf limit for AC distribution, and check busbar, PDU and cooling impact together for racks that exceed 100 kW with several shelves.
Revista de Informática Teórica e Aplicada (Universidade Federal do Rio Grande do Sul) 2019
Recognise that topology choice is only part of availability; equipment selection within a fixed topology can trade availability, losses and cost.
IEEE Open Journal of Industry Applications (Institute of Electrical and Electronics Engineers (IEEE)) 2025
In arc flash estimation for high-voltage battery rooms, do not use the maximum-power method alone with an enclosure multiplier; cross-check unrealistic results with measurement-based models such as Ammerman's.
Uptime Institute Journal 2026
Use these ratios as indicative risk multipliers in an option-comparison view, for example showing relative outage likelihood when switching cooling from N+1 to 2N.
arXiv preprint (Microsoft Azure Research / University of Illinois) 2025
Couple thermal and power headroom in the design tool: show how inlet temperature rise with outdoor conditions (for economiser or adiabatic systems) erodes GPU thermal margin and can trigger throttling.
ABB 2008
Model each protective device with Icu, Icw, I1/I2/I3 settings and t2 curve type so the tool can evaluate selectivity pairs.
ABB 2008
Default transformer impedance from the IEC 60076-5 table when the user leaves vk blank.
ABB 2006
Keep the earthing system as a project setting {TN-S, TN-C-S, TT, IT}.
Türkiye Elektrik Dağıtım A.Ş. (TEDAŞ) 2020
When placing a prefabricated substation, apply the IP 68 cable-entry and internal-arc layout rules (rear clearance of 100 mm or less, or closed).
Türkiye Elektrik Dağıtım A.Ş. (TEDAŞ) 2006
In site layout, offer a compact kiosk substation block (footprint, IP 23D, ventilation) as an option for edge and small sites.
Türkiye Elektrik Dağıtım A.Ş. (TEDAŞ) 2015
In MV cable sizing (TR profile), use the 90 C continuous and 250 C short-circuit limits for XLPE in the adiabatic short-circuit check.
Türkiye Elektrik Dağıtım A.Ş. (TEDAŞ) 2017
In the transformer catalogue (TR profile), preload hermetic transformer loss data (P0, Pk) by kVA from this specification as defaults.
Data Center Frontier (Black & Veatch contributed article) 2024
Offer a substation object with a configuration field (radial, main-tie-main, ring bus, breaker-and-a-half, double-bus double-breaker) and an insulation type field (AIS, GIS), with footprint and cost multipliers.
Schneider Electric 2011
Give each UPS a mainsConfig (single mains, dual mains, no bypass), an inverter-transformer flag and a per-input earthing system (TN-S, TN-C, TT, IT).
Schneider Electric 2011
Encode the seven IEEE 1159 categories as a list used in risk registers and mitigation pickers.
arXiv preprint (University of Alberta) 2024
Define AI load not only by energy but by peak/average (about 1 in training), peak/idle ratio and ramp/decline rates; make sub-second dynamics inputs for UPS, generator and grid-connection studies.
Energies (MDPI AG) 2017
For paralleled modules in a modular UPS, do not look only at the N+1 redundancy count; add to the design check that module-to-module filter and control parameter differences cause circulating current and thermal imbalance.
Siemens 2017
Store Ur, Up, Ir, Ik/tk, Ip, LSC category, IAC rating and accessibility, insulation medium and busbar scheme in the MV switchgear catalogue.
Siemens 2018
Offer W/m2 defaults by building type (data centre vs IT room) and redundancy-dependent simultaneity factors in early sizing.
Siemens 2012
Add "isolated-parallel rotary UPS" (N UPS + IP bus + chokes) as a UPS topology template.
All content and rights belong to the respective authors and publishers. SoSo CAD provides only the citation, its own summary and a link to the source, and is not responsible for the sources' content.
Monthly newsletter · free
Once a month: new library sources, changes to Turkish regulations and upcoming data centre events.
