Collection
Citations and summaries of IEC, ISO, ASHRAE, NFPA, TIA and TSE standards.
49–72 / 114
IEC 2016
In a commissioning module, generate an initial-verification test schedule per circuit from the design model: continuity, insulation resistance, polarity, fault-loop impedance and RCD tests.
IEC 2025
In the electrical rules engine, use IEC 60364-1 as the root of the low-voltage rule set.
IEC 2024
When cable routes cross fire-compartment boundaries, require a fire-stopping element and warn if it is missing.
IEC 2023
In cable and protection sizing, implement Ib <= In <= Iz and I2 <= 1.45 Iz style coordination checks together with short-circuit withstand.
IEC 2024
In surge and EMC design, add an SPD placement rule set: origin of the installation, sub-distribution and sensitive IT boards, with DC SPDs for battery and PV DC buses.
IEC 2024
In the cable sizing engine, base ampacity on installation-method tables with grouping and temperature derating.
IEC 2024
In the switchgear catalogue, tag devices with isolation suitability and RCD/RCM/IMD monitoring functions.
IEC 2021
Size protective conductors using the adiabatic k-factor check or the table method.
IEC 2018
In source modelling, keep safety-service loads (fire pumps, smoke extract, emergency lighting) on a separate bus fed by a qualified safety source.
IEC 2019
In the energy module, score the electrical design for losses (transformer, UPS, cable I2R) and metering granularity.
IEC 2020
In the switchboard catalogue, store the assembly's rated current (InA), the group rated current or rated diversity factor per circuit, Icw/Ipk and the form of separation.
IEC 2020
On the main LV switchboard object, require form of separation (1-4b) as a catalogue field and default to Form 3b/4 for concurrently maintainable designs.
IEC 2024
Board selection rule: allow the DBO type only for office/support-area final boards within the 250 A/125 A limits.
IEC 2012
In the busway object, catalogue rated current, Icw, R/X per metre, tap-off ratings and IP class.
NFPA 2025
In the generator module, capture the EPSS class (fuel run time), type (start time) and level on the generator object and size fuel storage to the class.
NFPA 2025
In the UPS module (US profile), when a UPS feeds emergency or standby loads, record its stored-energy class (runtime) and test regime.
NFPA 2025
In a suppression calculator, compute agent quantity from protected volume, design concentration and minimum room temperature.
NFPA 2026
When NEC is selected, check article numbers against the 2026 edition because the reorganization moved content (for example the rules above 1 000 V).
NFPA 2027
In the arc-flash module, after the IEEE 1584 incident-energy calculation, produce NFPA 70E-style equipment labels (incident energy, arc-flash boundary, working distance).
NFPA 2025
In the fire module (US profile), place detectors per room type.
NFPA 2026
In battery room design, require ESS hazard-mitigation items when Li-ion UPS or BESS energy exceeds a configurable threshold.
BICSI ICT Today 2026
For AI templates, default to single-mode fiber, high-count trunks and dedicated back-end fabric pathways.
IEEE 2017
Include hose, quick-disconnect and fitting losses explicitly in the tool's rack-level hydraulic calculations, not just cold-plate pressure drop.
ASHRAE / The Green Grid 2014
In the PUE calculator, support partial PUE and measurement categories.
All content and rights belong to the respective authors and publishers. SoSo CAD provides only the citation, its own summary and a link to the source, and is not responsible for the sources' content.
Monthly newsletter · free
Once a month: new library sources, changes to Turkish regulations and upcoming data centre events.