Topic guide
Explore publications on data centre operations, maintenance, monitoring and routine technical processes. Review operational guidance in the context of your facility’s equipment, responsibilities and procedures.
49–72 / 232
Socomec 2024
In the single-line editor, tag transfer devices as ATSE (IEC 60947-6-1) or STS with a transfer-time field, and suggest STS where the load needs under about 10 ms.
AECOM 2014
Provide a PUE build-up chart by subsystem (chillers, fans, pumps, UPS, lighting, transformers) for existing-site audits.
arXiv (University of South Carolina) 2026
In data-centre generator load-transfer and retransfer sequencing, size load steps against generator voltage and frequency limits, and split steps whose prediction band crosses a limit into smaller steps.
Uptime Institute Intelligence 2023
Size edge templates in the tens-to-hundreds of kW range.
Cummins 2015
Compare candidate set sizes on count, footprint, install and maintenance cost for the target N+x, preferring fewer larger sets where the site allows.
Lawrence Berkeley National Laboratory / U.S. Department of Energy 2022
Mirror this process in the audit workflow of the operations module: pre-visit data request, on-site measurements, report.
Lawrence Berkeley National Laboratory 2025
Add a demand-flexibility scenario to the energy model: curtailable IT share and on-site generation or BESS dispatch.
Buildings (MDPI AG) 2025
Plan UPS maintenance from a condition table that maps each unit's state to MTBF and MTTR, then pick the units to maintain that meet target availability at the lowest cost.
ASHRAE 2020
Add vestibule or servicing-condition checks to the edge enclosure template.
Schneider Electric 2011
Never output a single PUE: produce a PUE-vs-IT-load curve (10-100%) and an annual PUE from hourly weather bins, labelling the averaging period explicitly.
Enerji Piyasası Düzenleme Kurumu (EPDK) 2022
If the site has on-site BESS or generation exporting to the grid, add a DSO SCADA interface item to the electrical scope.
U.S. Environmental Protection Agency (ENERGY STAR) 2026
Add a 'server room / embedded (<50 kW IT)' project template with prompts for sub-metering and a consolidation-vs-retrofit comparison.
Building Simulation (Springer Science and Business Media LLC) 2024
Calculate cooling plant efficiency from the lifecycle-average COP reflecting progressive IT load ramp rather than the design-point COP (in Beijing 2.9 lower than design).
T.C. Enerji ve Tabii Kaynaklar Bakanlığı 2011
In campus planning, sum the floor areas of all data-centre buildings on the campus when checking the energy-manager threshold.
Legrand 2024
In the layout tool, auto-place temperature/humidity sensors at least every fourth cabinet or every 3-9 m of aisle, at inlet heights including about 1.5 m, and flag aisles with none.
Schneider Electric 2022
In the metering plan generator, confirm meters exist to produce the chosen maturity tier's metric set: total facility kWh, IT kWh for PUE, renewable kWh, site water m3 for WUE, reused energy for ERF.
Schneider Electric 2017
Export every placed component as a CMMS asset row with the minimum fields, leaving serial number and dates blank for operators.
BICSI (via PR Newswire) 2019
Base the tool's project workflow states on the phase model running from concept to closeout.
Cummins 2024
Carry fuel compatibility (HVO/EN 15940), emissions tier/NOx and permitted annual run hours in the generator catalog.
Schneider Electric 2014
Add an optional O&M maturity self-assessment to the handover/operate module: 7 disciplines, 1-5 per sub-element, target versus actual.
Proceedings of the AAAI Conference on Artificial Intelligence (Association for the Advancement of Artificial Intelligence (AAAI)) 2025
Offer a fast-preview thermal mode with a voxel surrogate trained on the tool's own CFD runs: inputs of rack power by segment, CRAH setpoints, fan speeds and vent locations; output a 3D inlet-temperature map in under a second for layout iteration.
Uptime Institute Journal (Uptime Institute) 2017
In the fire module, when inert gas is selected, require low-noise nozzles or silencers and show a hard-drive acoustic risk warning.
Uptime Institute 2022
Use it as context for roadmap and assumption notes on density, grid and liquid cooling in the design wizard.
Uptime Institute 2023
Use as context for roadmap and assumption notes (density, grid, liquid cooling) in the design wizard.
All content and rights belong to the respective authors and publishers. SoSo CAD provides only the citation, its own summary and a link to the source, and is not responsible for the sources' content.
Monthly newsletter · free
Once a month: new library sources, changes to Turkish regulations and upcoming data centre events.
